Description
- Enclosure:
- Size: L = 145mm x W = 90.5mm x H = 80mm
- Enclosure protection: IP-64
- Enclosure material:
- Body: Polycarbonate plastic
- Screws: Stainless steel
- Pump:
- This pump is set to I2C mode by default
It can be change to UART mode. See data sheet for instructions - Flow rate: 0.5ml to 105ml/mins
- Accuracy: +/- 1%
- Modes of operation:
- Continuous dispensing
- Volume dispensing
- Dose over time mode
- Constant flow rate
- Dispense at startup
- Connector: 5 lead data cable
- Calibration: Single point
- Supplied tubing: 15.24 cm
- Tubing size: Any 5mm O.D. tubing
- Data protocol: UART & I2C
- Default I2C address 103 (0x67)
- Operating voltage 3.3V – 5V (logic)
- 12V – 24V (motor)
- Pump head: 8.1 meters
- Data format: ASCII
- Food safe: Yes
- This pump is set to I2C mode by default
