EZO-PMP Advanced Kit

$ 141.09$ 146.47

The EZO™ Advanced pump kit comes with everything found in our original EZO pump kit and more!

Having the pump already mounted into an enclosure saves a lot of time.
The power connector and data cable with breakout board make integration onto your device FAST!

*This device comes defaulted to I2C mode*
*You can switch it back to UART mode if desired*

Clear
SKU: AS.EZO-ADV-PMP Categories: ,

Description

  • Enclosure:
    • Size: L = 145mm x W = 90.5mm x H = 80mm
    • Enclosure protection: IP-64
    • Enclosure material:
      • Body: Polycarbonate plastic
      • Screws: Stainless steel
  • Pump:
    • This pump is set to I2C mode by default
      It can be change to UART mode. See data sheet for instructions
    • Flow rate: 0.5ml to 105ml/mins
    • Accuracy: +/- 1%
    • Modes of operation:
      • Continuous dispensing
      • Volume dispensing
      • Dose over time mode
      • Constant flow rate
      • Dispense at startup
    • Connector: 5 lead data cable
    • Calibration: Single point
    • Supplied tubing: 15.24 cm
    • Tubing size: Any 5mm O.D. tubing
    • Data protocol: UART & I2C
    • Default I2C address 103 (0x67)
    • Operating voltage 3.3V – 5V (logic)
    • 12V – 24V (motor)
    • Pump head: 2 meters
    • Data format: ASCII
    • Food safe: Yes

Additional information

Weight 0.7 kg
Dimensions 22 × 13 × 13 cm
Manufacturer

116